CYCMOTOR X1 STEALTH GEN 3, User Manual, Page: 13 / 38

Line up the motor body with your frame at the bottom bracket, place the
bottom bracket spacers accordingly (if applicable) and insert the right
(drive) side of the motor into the frame’s bottom bracket shell.
For a 68mm bottom bracket shell, place the 3mm bottom bracket spacer over the
right (drive) side bottom bracket cup before inserting it into the frame’s bottom
bracket shell.
For a 73mm & 83mm bottom bracket shell, there is no need to add any bottom
bracket spacers on the right (drive) side.
Note that the spacer/s can be added as needed. The above spacer placing
Line up the 3, 5, and/ or 7mm bottom bracket spacer/s provided inside
the adaptor bracket plate on the left (non-drive) side of the frame. Thread
the left (non-drive) side bottom bracket cup into the frame’s bottom
bracket shell through the spacer/s and the adaptor bracket plate. Rotate
clockwise & do not fully tighten yet .
For a 68mm bottom bracket shell, place the 5mm & 7mm bottom bracket spacer
over the left (non-drive) side bottom bracket cup before inserting it into the frame’s
bottom bracket shell.
For a 73mm bottom bracket shell, place the 3mm & 7mm bottom bracket spacer
over the left (non-drive) side bottom bracket cup before inserting it into the frame’s
bottom bracket shell.
For an 83mm bottom bracket shell, there is no need to add in any bottom bracket
spacers on the left (non-drive) side.
a.
b.
c.
01.
02.
a.
b.
c.
01.
02.
directions are guidelines only.
12