CYCMOTOR X1 STEALTH GEN 3, User Manual, Page: 22 / 38

04
© 2022 CYCMOTOR LTD
CONNECTING A DEVICE
STEP #1:
Open the app and tap the Search button at the
bottom of the screen. Kindly ensure your
phone’s Bluetooth is enabled. (Please keep close
to the motor while connecting)
STEP #2:
Available devices will then be listed, select your
kit and it will begin connecting to the controller.
(Please note signal strength)
STEP #3:
Once connected, the CONNECT icon will change
stating you are connected & can select again to
disconnect.
© 2022 CYCMOTOR LTD
MAIN SETTINGS PAGE
The settings page allows you to navigate through
different parameter categories. There are six different
categories with each providing a set of adjustable
parameters or readings from your ebike system.
IMPORTANT
Save all new changes in parameters to flash or risk
losing progress. Any changes made that were not
saved will be lost after a restart. Note to save after
every change in value.
To save to flash, tap the ‘Save’ button in the upper
righthand corner, ‘Save successful’ message will
appear upon completion.
21
RIDE CONTROL APP USER GUIDE