CYCMOTOR X1 STEALTH GEN 3, User Manual, Page: 25 / 38

04
© 2022 CYCMOTOR LTD
PERIPHERALS SETUP
SPEED SENSOR
Wheel Diameter
The wheel diameter can be measured or calculated.
We advise that this number must be calibrated so that
vehicle speed within the app matches display speed.
This will give more accurate speed liming under
different modes.
Remember to set the correct wheel size within the
display as well (only applicable to 500c & 750c displays).
Kindly refer to your user manual.
Wheel Magnet
This is the number of magnets in the wheel that is
communicating with the speed sensor. For more
accurate vehicle speed limiting and measurement, we
advise to add more magnets to the wheel.
BRAKE SENSOR
Brake Sensor Enable
Enable/Disable brake sensors
BRAKE SENSOR SIGNAL INVERT
TAB
If you are using brake sensors from a different supplier,
you can use this feature to set up your brake sensors as
needed.
MOTOR TEMP
This is an advanced feature and requires a password
from CYC to change. This allows you to disable your
motor temperature sensor. Contact
technical_support@cycmotor.com for more details.
© 2022 CYCMOTOR LTD
BATTERY
SERIES OF CELLS
10s = 36V, 14s = 52V, 20s = 72V
MAXIMUM VOLTAGE
The value the controller will fault when connecting too
high a voltage to the system. An error will be triggered
if a battery is too high of a voltage.
MINIMUM VOLTAGE
The value the controller will fault when connecting too
low a voltage to the system. This setting can be used to
protect your battery if too much voltage sag is
detected.
24
RIDE CONTROL APP USER GUIDE