CYCMOTOR X1 STEALTH GEN 3, User Manual, Page: 16 / 38

Insert the BB92 to BSA adapters provided to the frame’s bottom bracket
shell. Use a pressfit installation tool to insert the adaptors.
Line up the motor body with your frame at the bottom bracket and insert
the right (drive) side of the motor into the frame’s bottom bracket shell.
Add 2 x M5*6 screws into the left (non-drive) side adaptor plate and the
mounting bracket.
Add the 5mm bottom bracket spacer provided outside the adaptor
bracket plate on the left (non-drive) side of the frame. Thread the left
(non-drive) side bottom bracket cup into the frame’s bottom bracket shell
through the spacer and the adaptor bracket plate. Rotate clockwise.
Insert the spindle from the right (drive) side. Note that you will need to
line up the splines with the chainring assembly. If your spindle does not
go through or comes to a hard stop before being fully inserted, rotate the
spindle a bit and try again. Once the spindle is lined up, a soft tip hammer
may also be used to get the spindle all the way through.
01.
02.
03.
04.
05.
02.
04.
03.
05.
01.
15