28
TOPOLOGY SW102
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology
Intelligent Technology Co., Ltd. (otherwise known as Topology). All the information contained in this manual is published in
good faith and for general information purpose only. Contact
for further assistance.
Clean Trip Data
Wait 15 seconds after starting up the motor system to be able to enter the “Clean Data”
menu. Long press the MENU button to clear the previous trip data. Please note that the trip
data does not automatically clear once you restart the motor system. This is a manual
process.
Error Codes
In certain circumstances, an error code may appear on your display. Contact
for assistance. *TBC
TOPOLOGY SW102
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology
Intelligent Technology Co., Ltd. (otherwise known as Topology). All the information contained in this manual is published in
good faith and for general information purpose only. Contact
for further assistance.
Installation
1.
Open the display lock clip, set the display in the left handlebar (standard handlebar
ƐŝnjĞɌϮϮ͘ϮͿ͘ĚũƵƐƚŝƚŝŶƉůĂĐĞĂŶĚƚŝŐŚƚĞŶƚŚĞƐĐƌĞǁĂĐĐŽƌĚŝŶŐůLJ͘
Note:
Damage caused by excessive torque is not covered by the warranty
.
Pin Layout
1.
Red wire : Anode(36V to 72V)
2.
Black wire : GND
3.
Yellow wire : TxD (display -> controller)
4.
Green wire : RxD (controller -> display)
5.
Blue wire : Power cord to the controller
Certification
CE / IP65 (waterproof) / ROHS.
Be sure to contact
if further assistance is needed.
THANK YOU!
SW102 DISPLAY USER GUIDE
04
Summary of Contents for X1 STEALTH GEN 3
Page 1: ...X1 Stealth Gen 3 User Manual...
Page 9: ...BLDC Out runner CYC X6 Controller 150 0 2mm 8...
Page 12: ...11...
Page 38: ......