57
Copyright May 2020 Cycloricity Ltd.
Chapter 13 - Connect the cables
1.
System Cable
Connect the system cable to the
items on the handlebar (in the
same way you did in Chapter 1).
If you did not purchase a Display
with your eKit, remember to
connect the green cap to the green
connector of the system cable
instead.
If you did not fit the e-brakes, seal
the red connectors with electrical
tape to keep them protected.
Attach the System Cable to the
down-tube of your bike.
Use zip ties. But be careful not to
pinch the derailleur and brake
cables.
Connect the System cable to the
Controller.
