51
Copyright May 2020 Cycloricity Ltd.
4.
Ensure the bottom portion of the sensor (the plus sign) can be seen through the crevice of
the Magnet disc
Make sure the sensor is as close to the Magnet disc as possible, but not touching it.
If you’ve fitted the PAS correctly, the red light will blink as you rotate the magnet disc passed
it.
The adhesive on the sensor is not enough to cope with real life conditions. Secure the sensor
firmly with zip ties.
ATTENTION: If the spindle of your bottom bracket is too long, the Magent disc may move
away from the sensor as you ride your bike. This will result in the power cutting out.
If you experience this problem, push the magnet disc closer to the sensor. And consider
using hot-glue to keep the Magnet disc firmly in place.
