GLASS BREAKAGE PROTECTION
The P375 is equipped with a sophisticated glass breakage detection unit. The system will only respond to the
breaking of any glass in the vehicle.
To test the unit simply wind up all the windows and arm the P375. Wait 30 seconds before tapping the driver's
side window with a metal object such as a coin. The siren and indicators will sound and flash.
You should notice that there should be no trigger, regardless of how hard you hit the window or body of the
vehicle with your hand. This eliminates all false alarms.
OPTIONS
The PARALYSER 375 has a number of options than can be set or reset by means of the ignition switch and
remote control. To change these options you need to do the following:
!
Open and leave open the driver's door.
!
Turn the ignition switch from ACC position to the ON position the required number of times. During this
process the key must not remain in either position for more than two seconds, or else the P375 will drop
out of programming mode. Count each time the switch is in the ON position.
!
Leave the switch in the ON position when the required number is reached.
!
The vehicle indicators will flash approximately two seconds after last turn. Indicates P375 is ready to alter
option setting.
!
Press the larger button on either remote control.
!
The P375 will respond by flashing the indicators. Three flashes shows that the option is set and one flash
shows it has been reset.
