background image

ARMING AND DISARMING

To arm or disarm the system, press the larger button on the remote control. Arming the system is 
accompanied by two flashes from the indicators and one flash for disarming. If the siren confirmation option 
is enabled the P375 will also “chirp” the siren twice for arming and once for disarming.

PANIC

If the larger button on the remote control is pressed and held down for more than two seconds the system will 
go into a panic mode. In this mode the indicators will flash and the siren will sound. The panic mode will 
continue for thirty seconds. If you wish to cancel the panic signal before the thirty seconds then simply press 
the larger button of the remote control again

BOOT RELEASE (OPTIONAL)

Disarm the P375 by pressing the larger button on the remote control. Then press the smaller button on the 
remote control and keep it depressed until the boot releases. This will take about 3 seconds. This function will 
only operate if the vehicle is equipped with an electrical boot release and it is connected.

AUTO-ARMING

The system is set to automatically immobilise the vehicle. The engine will be immobilised within 30 - 40 
seconds after the ignition has been turned off.  If turned off with the remote control, the system will re-arm 
itself  (immobiliser only) within the same time period. This will be accompanied by two flashes of the 
indicators, and if the siren confirmation option is enabled the P375 will also “chirp” the siren twice.

Summary of Contents for PARALYSER 375













Reviews: