Cyclades AlterPath User Manual Download Page 261

Page: 261 / 418

Configuration

AlterPath KVM Installation, Configuration, and Users Guide

227

To Set the KVM’s Date and Time Manually

In Expert Mode, go to: Configuration > System > Time/Date.

The Date/Time form appears.

Make sure that Disabled is selected in the Network Time Protocol drop-
down list.

Fill in the date and time fields by selecting the appropriate numbers from
the drop-down lists.

Click “apply changes.”

To Set The Time and Date With NTP

In Expert Mode, go to: Configuration > System > Time/Date.

The Date/Time form appears.

Choose Enable from the Network Time Protocol drop-down list.

The NTP Server field appears.

Summary of Contents for AlterPath



































































































































































































































































































































































































































Search results

Summary of Contents for AlterPath

Reviews:

Related manuals for AlterPath

Brands by name

Popular brands

Cyclades AlterPath, User Manual

Search results

Summary of Contents for AlterPath

Reviews:

Related manuals for AlterPath

Brands by name

Popular brands