Cyclades AlterPath User Manual Download Page 244

Page: 244 / 418

Web Manager for Administrators

210

AlterPath KVM Installation, Configuration, and Users Guide

Complete the following additional fields as necessary:

• If you selected Log from the Target field, the following options also appear.

• If you selected Reject from the Target field, the following field appears:

Inverted

This ICMP option will be applied to all
rules except the currently selected rule.

Field Name

Definition

Log Level

The log level classification to be used based
on the type of error message (such as, alert,
warning, info, debug, and so on.).

Log Prefix

The prefix that will identify the log.

TCP Sequence

Check box to include TCP sequence in the
log.

TCP Options

Check box to include TCP options in the log.

IP Options

Check box to include IP options in the log.

Field Name

Definition

Summary of Contents for AlterPath



































































































































































































































































































































































































































Search results

Summary of Contents for AlterPath

Reviews:

Related manuals for AlterPath

Brands by name

Popular brands

Cyclades AlterPath, User Manual

Search results

Summary of Contents for AlterPath

Reviews:

Related manuals for AlterPath

Brands by name

Popular brands