Cyclades AlterPath, User Manual

Page: 189 / 418

Configuration
AlterPath KVM Installation, Configuration, and Users Guide 155
On the “User 1” and “User 2” forms, you can also redefine the command key
portion of keyboard shortcuts for each type of user. For more information
about redefining keyboard shortcuts, see “Redefining Keyboard Shortcuts
(Hot Keys)” on page 56 and “To Redefine KVM Session Keyboard Shortcuts
[Expert]” on page 151 if needed.
T
To Configure Local User 1 and User 2 Sessions
Perform this procedure if you want to redefine the parameters that apply to
KVM port sessions when a local user is directly logged into the KVM.
1.
In Expert mode, go to Configuration>KVM>General>.
2.
To configure parameters for the User 1 port, select the User 1 tab.
3.
To configure parameters for the User 2 port, select the User 2 tab.
The User 1 and User 2 forms are identical except that User 1 modifies the
User 1 port options, while User 2 modifies the User 2 port options.
4.
To change the idle timeout, enter a different number of minutes in the “Idle
Timeout” field.
5.
To change the screen saver timeout, enter a different number of minutes in
the “Screen Saver Timeout” field.
6.
To change the keyboard type, select a different keyboard from the
“Keyboard type” pull-down menu.
7.
To change the cycle time, enter a different number of seconds in the
“Cycle Time” field.