Cyclades AlterPath User Manual Download Page 267

Page: 267 / 418

Viewing System Information

AlterPath KVM Installation, Configuration, and Users Guide

233

Viewing System Information

The Information menu provides three forms for viewing information about
your KVM:

• General

• Port Status

• Read Sensor

General

Use the General form to view system information in the following categories:

• System – Kernel version, date, uptime, power supply

• CPU – CPU, clock, revision, Bogomips

• Memory – Total, free, cached, active/inactive, and so on.

• Ram Disk Usage – 1k-blocks, used/available, percent used, and mounted

• Fan Status – Rotations per minute

To View General Information for Your

KVM

In Expert mode, go to: Information>General.

The General information form appears.

Summary of Contents for AlterPath



































































































































































































































































































































































































































Search results

Summary of Contents for AlterPath

Reviews:

Related manuals for AlterPath

Brands by name

Popular brands

Cyclades AlterPath, User Manual

Search results

Summary of Contents for AlterPath

Reviews:

Related manuals for AlterPath

Brands by name

Popular brands