![background image](http://html1.mh-extra.com/html/cybex/cp-20794/cp-20794_owners-manual_2703647013.webp)
3-3
Using the Television
Switching On
The monitor will turn on automatically when you start using the fitness equipment. The power indicator LED will change
from RED to GREEN when “on”. The monitor can also be turned on using the remote control.
NOTE: When you stop
using the fitness equipment, the monitor will shut off when the fitness equipment shuts down.
Standby
The
STANDBY
button is located on the rear of the monitor. When the fitness equipment is not in use, the monitor will be in
STANDBY
mode and the power indicator light will be RED. To switch the monitor out of standby, press the
STANDBY
button on the rear of the monitor or press the power button on the remote control. The power indicator light will change
from RED to GREEN.
NOTE: Do not leave the monitor on overnight.
Changing Channels
1.
To change channels, Press the
PLUS
and
MINUS CH
keys on the remote control or use the channel
PLUS
and
MINUS
buttons on the fitness equipment. See Below.
NOTE: You must exit any on-screen menus before changing
channels.
2.
Your remote control also has keys
1
through
9
and
0
which can be used to directly select channel selections
without scrolling through every channel to reach your desired channel.
3.
Enter the one, two or three digit channel number on the remote control and then press the Enter key to switch to
channel.
4.
For sub channels such as 4-2, press the main channel number, than the oval “-“
key once and then the sub
channel number. Press the Enter key to switch to channel.
5.
To return to the previous channel you were watching press the button with two opposing arrows (above the
EXIT
button) on the remote control.
Volume Adjustment
To change volume, Press the
PLUS
and
MINUS VOL
keys on the remote control or use the channel
PLUS
and
MINUS
buttons on the fitness equipment. See Below.
NOTE: you must exit any on-screen menus before adjusting volume.
Fitness Equipment Buttons
Fitness Equipment Buttons
Remote Control Keys
Remote Control Keys
Summary of Contents for CP-20794
Page 2: ......
Page 4: ......
Page 6: ...ii This page intentionally left blank...
Page 10: ...2 2 This page intentionally left blank...