CYBEX CP-20794, Owner'S Manual

Page: 11 / 24

Power – Press to toggle the monitor standby mode on
and off.
Mute – Press to toggle audio mute on and off. Press the
VOL+ will also switch mute off.
Numeric Keypad – Press 0-9 to directly select a specific
channel.
Sub Channel Number Key – Press to enter a sub
channel number. Example: Channel 4-1.
Return to the Last Channel Key – Press to return to the
last channel viewed.
/- keys – Press to increase or decrease volume.
MTS – Press to select audio channels. Stereo or Mono.
CC – Press to set closed captioning On or Off.
C/- keys - Press to increase or decrease
channels. Press and hold to scan quickly.
Display – Press to display the source and channel
information.
Arrow Keys and Enter – Press to navigate the on screen
menus and adjust the system settings to your preference.
EXIT – Press to clear all on-screen displays and return to
monitor viewing.
MENU – Press to enter Menu and adjust settings or
tuning.
3-1
3 -- - Operation
REMOTE CONTROL
Installing the Remote Control Batteries
Remove the battery cover from the remote control and install 2 x AAA size batteries (provided) inside the compartment.
The diagram inside the battery compartment shows the correct way to install the batteries.
Using the Remote Control
To use the remote control, point it towards the sensor located on the front bottom of the monitor. You can operate all
functions using the remote control.