39
Cybex Owner’s Manual
7.
Remove a screw and washer from the right handle assembly using two 7/32” Allen wrenches.
Right
Handle
Washer
Screw
Pivot Pin Assembly
8.
Slide pivot pin assembly out and remove right handle assembly.
9.
Rotate right handle assembly 180 degrees.
10.
Apply Loctite to threads inside the pivot pin and screw.
11.
Place right handle assembly in position and slide pivot pin assembly back in place.
12.
Install the screw and washer to the right handle assembly using two 7/32” Allen wrenches.
Install the left linkage rod
1.
Pivot left handle assembly up and slide left linkage rod onto left arm.
Left Linkage
Rod
Linkage Rod
Cap
Screw
Washer
Left Arm
Flange
Spacer
Loctite
2.
Place a drop of Loctite onto the screw.
3.
Install the screw, washer, linkage rod cap, and flange spacer using a 3/16” Allen wrench.
4.
Tighten screw to a minimum of 90 in/lbs.
