81
Cybex Owner’s Manual
Recommended Service Schedule
All maintenance activities shall be performed by qualified personnel. Failure to do so could result in
serious injury.
This is the minimum recommended service.
Determine distance.
1.
Press the
Cybex
logo icon
to display the
Access Toolbox
and
Lock Screen
options.
2.
Press the
Access
Toolbox
icon to access the
Toolbox
login screen.
3.
Enter the sequence:
.
4.
Press the
Statistics
icon to access the
Recorded Statistics
screen.
5.
Locate and tap the icon for
Arc Trainer Totals
.
6.
Record Distance.
7.
Exit Set Up Mode by tapping the
Toolbox
icon
, then tap the
Home
icon
. The screen
will refresh.
First 500 Miles (800 KM)
Follow this procedure to ensure the belts are tensioned properly and in good condition.
1.
Remove access cover. (See previous procedure
Remove Access Cover
)
2.
Pull down and roll each belt to examine the condition. If a belt has cracks or appears worn, it
must be replaced immediately by a qualified service technician.
3.
Attach access cover. (See previous procedure
Attach Access Cover)
Every 5000 Miles (8000 KM)
Check drive belts for tension and wear. (See procedure First 500 Miles)
Move unit and vacuum underneath. Lift the rear of unit and roll it back from its present
position. Vacuum underneath and return unit to normal position.
Clean inside unit.
1.
Remove access cover. (See previous procedure
Remove Access Cover
)
2.
Using a vacuum cleaner attachment or hand vacuum, clean the exposed components.
3.
Remove dirt and debris from internal components.
4.
Using a
dry
cloth, wipe all exposed areas.
5.
Attach access cover. (See procedure
Attach Access Cover
)
