80
Cybex Owner’s Manual
Attach Access Cover
Do not over tighten screws.
1.
Replace and tighten the two upper screws removed in step 2
Remove Access Cover
using a
Phillips screwdriver
.
2.
Replace and tighten the two lower screws removed in step 1
Remove Access Cover
using a
Phillips screwdriver
.
3.
Test unit for proper operation.
E3 View Monitor
Cleaning
1.
Unplug E3 View Monitor power cord from the wall socket.
2.
Dust off the panel with a soft dry cloth as needed. The screen can be cleaned with computer
screen wipes or other non-abrasive, moist, disposable wipes.
Storage or Long Non-Use Periods
When not using product for an extended period of time the product should be disconnected from the
Power Supply, TV/Cable Signal Feed, Fitness Equipment and any Peripheral Devices.
Pixels
Very small red, blue, white or green spots may be visible or may appear on the screen. This is a
characteristic of liquid crystal display panels and is not a faulty condition. The liquid crystal panel is
built with very high precision technology giving fine picture details. Occasionally, a few non-active
pixels may appear on the screen as a fixed point. This does not affect the performance of monitor or
merit a warranty claim.
Maintenance
•
It is very important to have the unit regularly examined by a qualified technician to ensure the
product is fit for use.
•
If the unit malfunctions, please refer to a qualified technician for repair or replacement of defective
parts immediately. Do not attempt to use the monitor until it has been inspected and repaired by a
qualified technician.
•
For inspection, installation and servicing, please consult qualified technician.
•
Failure to use a manufacturer approved repair technician may void any warranty claims.
