CYBEX Arc Trainer 425A Service Manual Download Page 60

Page: 60 / 78

26. Attach S-Links.

Place the S-links in position on the handles.

See Figure 2.

Place a drop of Loctite (H) to the threads of

each BHSCS removed in step 5A and another

drop inside the shaft into where each BHSCS

will be tightened.

Install the spacer, end cap, washer and

BHSCS/loctite as shown Figure 2.

Using a 5/32” Allen wrench, tighten BHSCS

securely.

27. Test the unit for proper operation.

Connect the power cord into the power outlet.

Operate the unit to verify proper operation.

10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 • www.cybexinternational.com • [email protected]

Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc.

Arc Trainer® and its mark are registered trademarks of Cybex International, Inc.

Summary of Contents for Arc Trainer 425A















































































Search results

Summary of Contents for Arc Trainer 425A

Reviews:

Related manuals for Arc Trainer 425A

Brands by name

Popular brands

CYBEX Arc Trainer 425A, Service Manual

Search results

Summary of Contents for Arc Trainer 425A

Reviews:

Related manuals for Arc Trainer 425A

Brands by name

Popular brands