CYBEX Arc Trainer 425A, Service Manual

Page: 43 / 78

Arc Trainer
®
425A Input Handle
Kit No. 425AK006 - Right Input Handle Kit
Kit No. 425AK007 - Left Input Handle Kit
Installation Instructions
NOTE: This instruction sheet describes how to
replace the input handle in the Arc
Trainer 425A.
Tools Required
•
5/32” Allen wrench
•
7/32” Allen wrench (2)
•
Grease
1. Read and understand all instructions
thoroughly before installing this kit.
2. Verify kit contents. See Figure 1.
Figure 1
3. Remove the proper input handle.
A.
Unplug the power cord from the power outlet.
B.
Confirm you have the proper replacement
handle.
NOTE: The two handles are not
interchangeable.
D.
Unplug the heart rate cable. See Figure 3.
E.
Using two 7/32” Allen wrenches remove the
BHSCS and washer from the pivot shaft.
See Figure 3.
F.
Slide the pivot shaft through main frame
opening to remove input handle. See
Figure 3.
G.
Remove the proper input handle.
A
A
. Right Hand Input Handle, (1), 425AK006
B.
Left Hand Input Handle, (1), 425AK007
C.
Loctite, (1), YA000201
B
C
Figure 3
Right Input Handle
Left Input Handle
Pivot Shaft
Washer
Opening
Figure 2
S-Link E
nd Cap
Nylon
Washer
Input
Handle
C.
Using a 5/32” Allen wrench, remove the
BHSCS (Button Head Socket Cap Screw),
end cap and nylon washer securing the
S-link to the input handle. See Figure 2.
Heart Rate
Cables
BHSCS/
Loctite
BHSCS/
Loctite
Washer
Grease
Loctite
BHSCS/
Loctite
Grease
Loctite