![background image](http://html.mh-extra.com/html/cybex/arc-trainer-425a/arc-trainer-425a_service-manual_2703490040.webp)
Figure 4
Locking
Connectors
Upper Left
Side Cover
Screw
B.
Remove upper side covers.
7. Disconnect
drive
link.
A.
Using a 5/16” Allen wrench and 3/4” open
end wrench, remove the Button Head
Socket Cap Screw (BHSCS), locknut and
two nylon washers and set aside.
NOTE:
The BHSCS, locknut and washers will be
reused in step 17.
See Figure 5.
BHSCS
Locknut
Drive Link
Nylon
Washer
Figure 5
BHSCS/
Loctite
S-Link
Spacer
Figure 6
End Cap
B.
Tilt the drive link forward and lean on frame.
8. Disconnect
S-link.
A.
Using a 5/32” Allen wrench, remove the
BHSCS, washer, plastic end cap and spacer
securing both S-link of the handles to the
front legs. See Figure 6.
NOTE:
In older units remove the BHSCS,
aluminum end caps and nylon washers.
B.
Tilt handles back and lean on frame.
10. Remove rear leg and foot bar.
A.
Using two 7/32” Allen wrench, remove the
inside BHSCS, plastic end cap and spacer.
While holding the rear leg, remove the pivot
pin.
NOTE:
You may need a rubber mallet
and punch to remove the pivot pin.
NOTE:
Older units have an aluminum end cap
and do not have a spacer.
B.
Carefully lower the rear leg. See Figure 8.
BHSCS/
Loctite
End Cap
Pivot Pin
Rear Leg
Figure 8
Pivot Hole
Grease
Loctite
Loctite
Washer
Grease
Front
Leg
9. Remove BHSCS and end cap.
A.
Using a 7/32” Allen wrench, remove the
BHSCS, plastic end cap and spacer
securing the rear leg to the foot bar.
See Figure 7.
NOTE:
Older units have an aluminum end cap
and do not have a spacer.
End Cap
BHSCS/
Loctite
Figure 7
Rear Leg
Foot Bar
Spacer
Spacer
Summary of Contents for Arc Trainer 425A
