6.
Loosen the two screws in the left inner and outer collars using a Phillips screwdriver.
Qty
Description
2
Screws
1
1
Inner collar
2
1
Outer collar
3
1
Cover
4
7.
Slide the inner and outer collars onto the left cover.
8.
Insert the tabs of the collars into the slots of the cover.
9.
Tighten the two screws using a Phillips screwdriver.
10.
Repeat steps 1 through 9 for the right side.
Install foot pads
Have one person lift the unit while a second person places a foot pad under each of the two back feet.
Qty.
Description
2
Foot pads
1
Level unit
This procedure will level the unit by evenly adjusting the weight on the rear feet. Leveling the unit will
eliminate rocking during use.
Note:
References to left and right are from the users perspective during use.
1.
Verify foot plates are completely stopped.
Page 23 of 95
Cybex 771A/771AT, 772A/772AT Arc Trainer Part Number 5771-4 K
Summary of Contents for 771A
Page 1: ...Cybex 771A 771AT 772A 772AT Arc Trainer Owner s Manual Part Number 5771 4 K www cybexintl com ...
Page 7: ...Canadian Page 7 of 95 Cybex 771A 771AT 772A 772AT Arc Trainer Part Number 5771 4 K ...
Page 95: ...10 Trotter Drive Medway MA 02053 888 462 9239 508 533 4300 FAX 508 533 5183 www cybexintl com ...