4.
Press
Up
or
Down
to scroll through and verify all TV channels.
If all TV transmitters are stored, and they all correlate the TV number to the correct TV heard, setup
is complete. If not you may need to re-scan or adjust the transmitter codes (see documentation for
your transmitters to perform a code change).
5.
Press
STOP
to exit setup. Transmitter setup complete.
6.
Proceed to Add FM Radio Stations (optional).
Setup TV FM Transmitters
If your TV’s use FM transmitters, follow these instructions to assign a TV channel to each frequency.
1.
Press and the hold the
Display option
and
UP
keys for 3 seconds.
Display will show time setup.
2.
Press
DOWN
to navigate to the A/V setup screen.
3.
Press the
ENTER
key.
4.
Press the
UP
or
DOWN
keys to select FM.
5.
Press the
ENTER
key.
6.
Plug in headphones to listen for channels during setup.
7.
Press
Display option
to seek the next TV FM frequency or
UP
or
DOWN
to tune
manually.
8.
Press Resistance
UP
or
DOWN
keys to add [Add] a channel.
Press
ENTER
to save channel, std (stored) will be displayed.
9.
Repeat steps 3 and 4 to add all TV FM channels.
10.
Press
Stop
to exit setup when all the TV’s FM transmitter frequencies have a TV number.
Transmitter setup complete.
11.
Proceed to Add FM Radio Stations (optional).
Add FM Radio Stations (optional)
If strong local FM Radio Stations are available in the area, you can set those as presets.
1.
Enter A/V setup mode.
2.
Press
Workouts
to display FM on the console.
The left numeric will display CH 1.
Page 34 of 80
Cybex 525C/525R Cycle Part Number LT-24303-4 E