![background image](http://html.mh-extra.com/html/cybex/525c/525c_owners-manual_2703496039.webp)
Auto Program (ATSC Monitor)
1.
Press
to select
Auto Program
.
2.
Press
to enter the menu.
3.
Press
or
to select
Mode
.
Mode
Channel Sequence
Additional Digital Signal
Channel Map
Figure 3: ATSC Monitor
4.
Press
or
to set the scope of channel scanning.
a) Analog Only (Default): TV searches for analog channels only.
b) Digital Only: TV searches for digital channels only.
c) Analog and Digital: TV searches for both analog and digital channels.
5.
Press
to select
Channel Sequence
.
6.
Press
or
to set the Channel Sequence in which the channels are displayed after searching.
a) Interleave A+D: In the order of channel number regardless of the system.
b) All A then D: Digital channels are displayed after all analog channels.
7.
Press
or
to select
Additional Digital Signal
.
Not available when
Mode
is set to Analog Only.
8.
Press
or
to choose the
Additional Digital Signal
source.
Choices are: None, Air, Cable STD, Cable IRC, or Cable HRC.
Page 39 of 80
Cybex 525C/525R Cycle Part Number LT-24303-4 E