CYBEX 525C Owner'S Manual Download Page 14

Page: 14 / 80

• 9/16” Open end wrench

Assembly Procedure

Two people will be required for this procedure.

Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure
to return, replace, or reorder parts.

The words "left" and "right" denote the user's orientation.

Verify you have received the correct package

Read box label to verify the model number and voltage (optional) match what was ordered.

Verify paint color matches what was ordered.

525C Assembly

Verify parts list shown below

Description

Part Number

Quantity

Item

Base with covers attached

Varies

Console assembly

Varies

Back Cap

PL-21584

Front Left Cover

PL-21581

Front Right Cover

PL-21582

Top Cap

PL-21583

Hardware pack

AX-21698

Owner’s Manual

LT-24303-X

Assembly poster

LT-24300

Warranty sheet, Consumer

LT-24291

Warranty sheet, Commercial, Entry

LT-24292

Warranty sheet, Commercial, Full

LT-24293

Power cord (E3 View Monitor option)

Varies

Cable, 6’, Coax (E3 View Monitor option)

AW-23836

Page 14 of 80

Cybex 525C/525R Cycle Part Number LT-24303-4 E

Summary of Contents for 525C

















































































Search results

Summary of Contents for 525C

Reviews:

Related manuals for 525C

Brands by name

Popular brands

CYBEX 525C, Owner'S Manual

Search results

Summary of Contents for 525C

Reviews:

Related manuals for 525C

Brands by name

Popular brands