APPENDIX A-10
Setting up Generic\Text only Printer Driver
In order to use this printer controller with Windows and use the
resident fonts. Use the "Generic/Text only" printer driver. This
will allow the application program to pass control characters to
the printer, even though the driver indicates text only. No graphic
data will be sent. In order to be WYSIWYG use the Cybertech printer
driver.
To setup the "Generic/Text only" driver:
1. From the "Program Manager", Double click on "Main".
2. Double click on "Control Panel".
3. Double click on "Printers".
4. Add "Generic/Text only" printer driver.
4. Double click on "Setup".
6. Set Paper size for "Letter" and "Feed" for "Continuous".
7. Double click on modify and setup parameters accordingly.
a. Reset Leave Blank
b. 10 cpi <ESC>SF2
c. 12 cpi <ESC>SF1
d. 16 cpi <ESC>SF0
e. Begin Double Width <ESC>SH2
f. End Double Width <ESC>SH1
8. Double click on "OK".
9. Set "Generic/Text only" as the default printer.
The application program with it's embedded control characters will
now be processed by the printer. This will allow any printer
command to passed through Windows.
Summary of Contents for PX922E
Page 1: ...Model PX922E THERMAL PANEL PRINTER PRODUCT MANUAL with ETHERNET Revised February 20 2018...
Page 10: ...Figure 2 1...
Page 13: ...FIGURE 2 2...
Page 14: ...Figure 2 3...
