4.2.31 PRINT GRAPHIC BUFFER (1B,67,50)
When a hex code 1B,47,50 is received the contents of the graphic
buffer is printed and the printer returns to line mode. This
command is used in conjunction with buffered raster or PCX
graphics. This uses the same buffer as text. If a line of text is
received the graphic data may be over written.
4.2.32 LOAD n GRAPHIC BYTES (1B 67 72 x data)
When this command lead-in is received followed by a byte of the
number of graphic bytes(0 to 255) and then the graphic data, this
data will be placed on the current graphic line. If a line overflow
should occur that data will be truncated. The data will start at
the current XCORD (modulo 8) to force a byte boundary.
4.2.33 LOAD n ENCODED BYTES (1B 67 58 x data)
When this command is received followed by a byte count then the
graphic data. This data will be placed on the current graphic line.
If a line overflow should occur that data will be truncated. The
data will start at the current XCORD (modulo 8) to force a byte
boundary. The Encoded data is a modified PCX format.
4.2.34 PRINT ONE GRAPHIC LINE (1D)
When this command is received the current graphics line counter is
incremented by one count. If a buffer overflow occurs or a vertical
tab command is received the graphic buffer will print.
4.2.35 GET RESIDENT GRAPHIC (1B,67,52)
This sequence is used to retrieve the resident graphic from memory
and load it into the print buffer.
Summary of Contents for PX922E
Page 1: ...Model PX922E THERMAL PANEL PRINTER PRODUCT MANUAL with ETHERNET Revised February 20 2018...
Page 10: ...Figure 2 1...
Page 13: ...FIGURE 2 2...
Page 14: ...Figure 2 3...
