4.2.48 SET PRINT RATE (1B 70 0-7)
The Print rate may be controlled via software to optimize the
printing and data rate. A higher rate may be used if the internal
fonts are used and print rates of greater then three inches per
second (IPS) are possible. A slower rate may be desired when
printing graphics to obtain the highest possible quality. The print
rate should be set so the printer prints as smoothly as possible to
prevent compressed dot rows caused by disruption in data flow. USB
or high serial baud rates are preferred.
If the printer is to be used in a low temperature environment
slower print speeds are recommended.
Value Print Speed IPS
0
1.00
1
1.19
2
1.37
3
1.51
4
1.67
5
1.77
6
1.92
7
2.00
4.2.49 PRINT TEST MESSAGE(1B 49)
Upon receiving this command the printer will print the internal
test message with printer’s settings.
Summary of Contents for PX922E
Page 1: ...Model PX922E THERMAL PANEL PRINTER PRODUCT MANUAL with ETHERNET Revised February 20 2018...
Page 10: ...Figure 2 1...
Page 13: ...FIGURE 2 2...
Page 14: ...Figure 2 3...
