Status Commands
4.2.50 SEND STATUS BYTE TO HOST (09)
When this command is received the printer will transmit the
current printer status (Serial version only).
Bit 0 not used
Bit 1 if set, printer has a Temperature fault
Bit 2 if set, the print head is in the open position
Bit 3 not used
Bit 4 if set, a paper out conditions exists
Bit 5 not used
Bit 6 not used
Bit 7 if set, the battery for the Real Time Clock and RAM is low
and the macro's & configuration may be corrupt
4.2.51 SEND PRINTER ID (1B 71)
Sends ‘A922’ back to host for printer type/id.
4.2.52 SEND PRINTER FIRMWARE VERSION (1B 51)
When the firmware version is requested an ASCII string of the
version is transmitted out the serial port. The data sent is the
version number in ASCII followed by a carriage return.
Summary of Contents for PX922E
Page 1: ...Model PX922E THERMAL PANEL PRINTER PRODUCT MANUAL with ETHERNET Revised February 20 2018...
Page 10: ...Figure 2 1...
Page 13: ...FIGURE 2 2...
Page 14: ...Figure 2 3...
