CyberResearch GFC IPM User Manual Download Page 61 | Manualshive

Page: 61 / 90

CyberResearch GFC IPM User Manual Download Page 61

DNS server in regular intervals and registers its IP address there. The administrator
may contact this server as well and pick up the same IP address belonging to his card.

The administrator has to register an GFC IPM switch that is supposed to take part in the
service with the Dynamic DNS Server and assign a certain hostname to it. He will get a
nickname and a password in return to the registration process. This account
information together with the hostname is needed in order to determine the IP address
of the registered GFC IPM switch.

You have to perform the following steps in order to enable Dynamic DNS:

• Make sure that the LAN interface of the GFC IPM switch is properly configured.

• Enter the Dynamic DNS Settings configuration dialog as shown in Figure 6-25.

• Enable Dynamic DNS and change the settings according to your needs (see below).

Enable Dynamic DNS

This enables the Dynamic DNS service. This requires a configured DNS server IP
address.

Dynamic DNS server

This is the server name where GFC IPM switch registers itself in regular intervals.
Currently, this is a fixed setting since only dyndns.org is supported for now.

DNS System

Choose Dynamic for free DNS service. Custom for your own domain.

Hostname

This is the hostname of the GFC IPM switch that is provided by the Dynamic DNS
Server. (use the whole name including the domain, e.g. testserver.dyndns.org , not
just the actual hostname).

Username

You have registered this username during your manual registration with the
Dynamic DNS Server. Spaces are not allowed in the Nickname.

Password

You have used this password during your manual registration with the Dynamic
DNS Server.

Check time

The GFC IPM switch registers itself for initiating the IP address of GFC IPM switch
stored in the Dynamic DNS server at this time.

Check interval

This is the interval for reporting again to the Dynamic DNS server for updating the
IP address associated with the Domain Name of the GFC IPM switch.

CyberResearch

®

KVM Accessories

GFC IPM

CyberResearch, Inc

.

59

25 Business Park Drive

P: (203) 643-5000; F: (203) 643-5001

Branford, CT USA

www.cyberresearch.com

«
...
59
60
61
62
63
...
»

Summary of Contents for GFC IPM



























































































Reviews:

No comments