manualshive.com logo in svg

CyberResearch GFC IPM, User Manual, Page: 11 / 90

Share
Download
CyberResearch GFC IPM User Manual Download Page 11

the top of the Remote Console. 

Figure 1-2. Top part of the Remote Console 

There are some options to choose from, and the important ones are the following:   

Auto Adjust button 

If the video displayed is of bad quality or distorted in some way, press this button and 
wait a few seconds while GFC IPM switch tries to adjust itself for the best possible 
video quality. 

Sync Mouse 

Choose this option in order to synchronize the local with the remote mouse cursor. 
This is especially necessary when using accelerated mouse settings on the host 
system. In general there is no need to change mouse settings on the host. 

Video Settings in Options Menu   

This opens a new window with elements to control the GFC IPM switch Video Settings. 
You can change some values, for instance the brightness and contrast of the picture 
displayed, which may improve the video quality. It is also possible to revert to the 
default settings for all video modes or only the current one. 

Note:

 At first start, if the local mouse pointer is not synchronized with the remote mouse 

pointer, press the Auto Adjust Button once. 

CyberResearch

® 

KVM Accessories 

 

GFC IPM 

 

CyberResearch, Inc

.  

9

 

25 Business Park Drive 

 

P: (203) 643-5000; F: (203) 643-5001 

Branford, CT USA 

 

www.cyberresearch.com 

 

Summary of Contents for GFC IPM



























































































Reviews:

No comments