6.6 Device Settings
6.6.1 Network
The Network Settings panel as shown in Figure 6-24 allows changing network related
parameters. Each parameter will be explained below. Once applied the new network
settings will immediately come into effect.
Figure 6-24. Network Settings
Warning
The initial IP configuration is usually done directly at the host system using the
special procedure described in Table 4-1.
Warning
Changing the network settings of the GFC IPM switch might result in losing
connection to it. In case you change the settings remotely make sure that all
the values are correct and you still have an option to access the GFC IPM
switch.
IP auto configuration
With this option you can control if the GFC IPM switch should fetch its network
settings from a DHCP or BOOTP server. For DHCP, select “dhcp” , and for BOOTP
select “bootp” accordingly. If you choose “none” then IP auto configuration is
disabled.
GFC IPM
CyberResearch
®
KVM Accessories
56
©Copyright 2009
CyberResearch, Inc.