CPS1000AVR
Guaranteed Uninterruptible Power System
7
3. Clear:
Clears the selected log.
4. Cancel:
Exits the screen without saving any changes.
5. OK:
Exits the screen and saves any changes.
6. Data
Record
Option Button:
When this option is selected, the log will display a record of the items that are
shown in the main window.
7.
Closed Application Information Option Button:
When this option is selected, the log will display the
names and location of any files that were auto-saved by the software.
POWERPANEL PLUS™ LOG MENU
1.
Event Option Button:
When this
option is selected, the log will display
different PowerPanel Plus™ events,
such as power failure, program start,
and program end.
2. Log
Display:
This area displays
the information as selected by the
Event
,
Closed Application
Information
, or
Data Record
option
button.
3. Clear:
Clears the selected log.
4. Cancel:
Exits the screen without saving any changes.
5. OK:
Exits the screen and saves any changes.
6.
Data Record Option Button:
When this option is selected, the log will display a record of the items that are
shown in the main window.
7.
Closed Application Information Option Button:
When this option is selected, the log will display the
names and location of any files that were auto-saved by the software.
TESTING YOUR UPS SYSTEM
Once you have set up your UPS system, you may wish to test it. Make sure that the UPS has been charged for at least 4
hours before performing this test.
If you are using PowerPanel Plus™:
1.
With your UPS and computer on, open an application such as notepad.
2.
Enter some data into the application.
3.
Unplug the UPS from the AC outlet.
When a power failure occurs, PowerPanel Plus™ will appear on the screen. The outlet and battery symbols will change to
indicate a power failure. The countdown timer will move towards zero. When the timer reaches zero, the software will
begin to save and close any open applications. The software will auto-assign names to any files that have not been
previously saved, and then save the file to the
PCTemp
folder which is located in the root directory of your
C drive
(where
C
is the name of your main hard drive). Once all open files have been saved and closed, PowerPanel Plus™ will shut down the
operating system. Once the operating system is shutdown, the UPS will turn off within 90 seconds. Wait until the UPS
has turned off before plugging the UPS back into the outlet.
Once the test has been completed, plug the UPS back into the AC outlet and turn it back on. You may then restart your
computer. Please allow 4 hours for the UPS to recharge before attempting another self-test.
If you are not using PowerPanel Plus™:
1.
Have your computer and UPS turned on.
2.
Unplug the UPS from the wall to simulate a power failure.
3.
The UPS will begin beeping, indicating a power failure.
4.
Save and close any open files.
5.
Shut down the operating system.
6.
Once the computer system is shutdown, turn the UPS off.