Operations Guide
931281I
CyberData Corporation
A.1.1 Mounting the Enclosure
To mount the enclosure:
1. Prepare holes for the screws.
2. Plug in the power adapter and use the
Power (PWR)
LED to verify that the power is on.
3. Plug the ethernet cable into the device. The
Link/Activity (Link/Act.)
LED verifies the network
connection.
4. For wall mounting, use the three #8 x 1-1/4-inch Truss Head Phillip screws to secure the
speaker. See
Figure A-1. Mounting the Enclosure
Wiring the 125V AC Plug
GENERAL ALERT
Caution
Equipment Caution:
The green wire with the yellow stripe is a ground connection
for Electrostatic Discharge (ESD) protection, and should not be removed.
To wire the 125V AC plug, consult a licensed electrician and the local building
codes in your area.
Sheet Metal Screw (3x)
#8x1.25" Truss Head Phillips
531032
Plastic Ribbed Anchor (3x)
151147
Summary of Contents for InformaCast Enabled 011406
Page 80: ...Operations Guide 931281I CyberData Corporation Figure 2 41 SSL Configuration Page ...
Page 81: ...Operations Guide 931281I CyberData Corporation Figure 2 42 SSL Configuration Page ...
Page 90: ...Operations Guide 931281I CyberData Corporation Figure 2 47 Audiofiles Page ...
Page 91: ...Operations Guide 931281I CyberData Corporation Figure 2 48 Audiofiles Page ...
