Operations Guide
931281I
CyberData Corporation
Device2 goes through the same steps by setting its device name to
CyberData Autoprovisioned
,
its SIP server to
10.0.0.253
, and its port to
5060
. When Device2 “sees”
sip_[macaddress].xml
,
Device2 replaces it with its own mac address and downloads
sip_0020f7020002.xml
from
“https://autoprovtest.server.net.” Device2 sets the SIP User ID to
500
, the password to
ext500
, and
the dialout extension to
555
.
Autoprovisioning
Example 2
Here is another example of setting up your autoprovisioning files:
We boot up two devices with mac addresses
00:20:f7:02:00:01
and
00:20:f7:02:00:02
(Device1
and Device2) and boot them on a network with a DHCP server configured with an autoprovisioning
server at
10.0.1.3
on option
150
. Our TFTP server has three files:
0020f7020001.xml
<MiscSettings>
<AutoprovFile>common_settings.xml</AutoprovFile>
</MiscSettings>
<SIPSettings>
<SIPUserID>198</SIPUserID>
<SIPAuthPassword>ext198</SIPAuthPassword>
<DialoutExtension0>204</DialoutExtension0>
</SIPSettings>
0020f7020002.xml
<MiscSettings>
<AutoprovFile>common_settings.xml</AutoprovFile>
</MiscSettings>
<SIPSettings>
<SIPUserID>500</SIPUserID>
<SIPAuthPassword>ext500</SIPAuthPassword>
<DialoutExtension0>555</DialoutExtension0>
</SIPSettings>
common_settings.xml
<MiscSettings>
<DeviceName>CyberData Autoprovisioned</DeviceName>
</MiscSettings>
<SIPSettings> <SIPServer>10.0.0.253</SIPServer>
<RemoteSIPPort>5060</RemoteSIPPort>
</SIPSettings>
1. On boot, Device1 downloads
0020f7020001.xml
from
10.0.1.3
and imports these values. The SIP
User ID is
198
, the password is
ext198
, and the dialout extension is
204
.
2. Device1 then gets the filename
common_settings.xml
from the AutoprovFile element and
downloads this file from the TFTP server at
10.0.1.3
. and imports these settings. The device name is
set to
CyberData Autoprovisioned
, the SIP server is set to
10.0.0.253
, and the port is set to
5060
.
Device2 does the same except it downloads
0020f7020002.xml
on boot and imports these values
instead. The Sip User ID is
500
, password is
ext500
, and dialout extension is
555
. Device2 then
downloads the
common_settings.xml
file and imports those values. The device name is set to
CyberData Autoprovisioned
, the SIP server is set to
10.0.0.253
, and the port is set to
5060
.
Summary of Contents for InformaCast Enabled 011406
Page 80: ...Operations Guide 931281I CyberData Corporation Figure 2 41 SSL Configuration Page ...
Page 81: ...Operations Guide 931281I CyberData Corporation Figure 2 42 SSL Configuration Page ...
Page 90: ...Operations Guide 931281I CyberData Corporation Figure 2 47 Audiofiles Page ...
Page 91: ...Operations Guide 931281I CyberData Corporation Figure 2 48 Audiofiles Page ...
