26/38
S
ept
.
2014
V3.1
Material used and thickness
Tools selection
Angle of the bend
Length of the flange
Add step or next step
Program number
Current step (sequence) number
CybTouch 12 PS User Manual
n
uMerical
M
ode
It is also possible to simply create a part program directly on the
.
S
etting
i
nStructionS
:
1. Touch the program number and select
New program
in the list.
2. First select the tools to be used for the part by touching their respective icons (see
).
3. Touch the material’s name (here
Steel
is displayed.
4. In the
, and other sequence parameters (
5. Touch the
button to return to the Bend Numerical page.
6. Touch the numerical value next to the angle icon
, and enter the value for the
first bend you wish to create (here
90°
).
7. Touch the numerical value next to the segment length icon
, and enter the value
for the first segment you wish to create (here
30.00 mm
).
8. Add the next bend to the program by touching
.
9. Proceed in the same manner to create the other segments of the part.
10. Touch
to return to the first bend.
11. Start the hydraulic pump motor (by pressing this button
if available. It turns red
when the motor is running the button becomes red).
12. Press the
button to position the machine according to the data that were just
entered.
13. When the machine is ready to bend, a
button is displayed.
14. Press the foot switch to execute the bend.
