CYBELEC CybTouch 12, User Manual

Page: 23 / 46

15/38
S
ept
.
2014
V3.1
CybTouch 12 PS User Manual
The More page displays parameters related to the part, and depending on the CybTouch
configuration and the type of action performed, it also displays various settings for the
current bend.
Available
functions on the
More page
Material
This is not a sequence parameter, but of course a part parameter. Each touch on the
material’s name selects the next available from the list of
Materials (see page 7) .
Material thickness
The default thickness, defined in Materials (see page 7) , is automatically displayed
when changing material. It is however possible to change it simply by touching this icon.
This is also of course a part parameter.
Material sigma
The default sigma, defined in Materials (see page 7) , is automatically displayed when
changing material. It is however possible to change it simply by touching this icon. This is
also of course a part parameter.
Back gauge retraction
The back gauge retraction can be activated/deactivated at its Default retraction (see
page 8) value using this icon. It is possible to modify the value by touching it. This is a
sequence parameter, meaning it can be modified with each step of the program.
Speed change threshold and bending speed
The distance parameter allows the operator to increase the height of the speed change
point. The speed parameter allows decreasing the bending speed from its maximum value
defined in the machine parameters.
Bending length
This parameter defines the width of the sheet metal part that will be pinched between the
tools. It is used to calculate the bending pressure.
If this parameter is not activated (gray), the CybTouch will not calculate the
bending
Force and the Crowning .