CYBELEC CybTouch 12 User Manual Download Page 42

Page: 42 / 46

34/38

ept

2014

V3.1

CybTouch 12 PS User Manual

eSSaGe

eScripTion

W39

Moving and counting
directions have inverted

Wizard message: Both the rotary direction of the motor and the
counting have been changed.

W40

Indicates a cycle or operation has properly ended.

W41

No movement executed

Axis Wizard message: Operator pressed

but no movement

was made.

W42

Enter next measured angle

When using double or triple angle measurement, tells the
operator to enter the next measured value.

W43

OK, correction done

Appears when an angle correction has been entered and applied.

W45

Enter unlock interface
password

This message is displayed when parameter P02.04 Level 0 Lock
HMI is set to

yes

and the screen is touched.

W46

Enter password level 1 or
greater

This message is displayed when a password of level 1 or higher
is needed to execute a specific operation.

W47

Enter password level 3

This message is displayed when a password of level 3 or higher
is needed to execute a specific operation.

W48

Enter new password

These messages are displayed when changing passwords.

W49

Confirm new password

W50

Enter password for backup

This message is displayed when trying to create a backup.

W51

Enter password for restore

This message is displayed when trying to restore a backup.

W52

Enter password for init

This message appears on the page displayed after the system
crashed (soft or hardware problem), when the operator tries to
format the machine.

W53

Enter password for delete all
backups

This message is displayed when trying to delete all backups.

Summary of Contents for CybTouch 12















































Search results

Summary of Contents for CybTouch 12

Reviews:

Related manuals for CybTouch 12

Brands by name

Popular brands

CYBELEC CybTouch 12, User Manual

Search results

Summary of Contents for CybTouch 12

Reviews:

Related manuals for CybTouch 12

Brands by name

Popular brands