manualshive.com logo in svg

Custom Audio Electronics VKP80II-EE, User Manual

The Custom Audio Electronics VKP80II-EE is a top-quality audio device with advanced features. Unlock its full potential with the comprehensive User Manual, available for free download at manualshive.com. This detailed manual ensures seamless operation and optimal performance, allowing you to get the most out of your VKP80II-EE experience.

Share
Download
background image

4 OPERATION

4.1  Adjusting paper width

Paper width may be adjusted from 60mm to 82.5mm using the right (Dx) and Left (Sx) slides located at the paper 
infeed opening.
Move the right and left slides to adjust the paper width (see following 

fi

 gure). Below the right slide there are four point 

of reference for paper width (60, 70, 80 and 82.5mm).
Move the slides to align the internal side of the 

fi

 n (A) with the point of reference.

A

4. OPERATION

User Manual

  VKP80II-EE  25

Summary of Contents for VKP80II-EE





















































































Reviews:

No comments

Related manuals for VKP80II-EE

Qls 2000 Series Operation & Setup Manual preview
2000 Series
Brand: Qls Pages: 53
Xerox 2000 Series Operation Manual preview
2000 Series
Brand: Xerox Pages: 36
Canon i 320 Simplified Manual preview
i 320
Brand: Canon Pages: 18
Canon G1020 Series Getting Started preview
G1020 Series
Brand: Canon Pages: 16
Canon CX-G2400 Getting Started Manual preview
CX-G2400
Brand: Canon Pages: 39
Canon i455 Series Setup Instructions preview
i455 Series
Brand: Canon Pages: 2
Canon i455 Series Quick Start Manual preview
i455 Series
Brand: Canon Pages: 73
Canon i70 Series Quick Start Manual preview
i70 Series
Brand: Canon Pages: 29
Canon i550 Parts Catalog preview
i550
Brand: Canon Pages: 16
Canon i475D Series Printing Manual preview
i475D Series
Brand: Canon Pages: 44
Canon G3410 Getting Started preview
G3410
Brand: Canon Pages: 60
Olympus P 400 Easy Printing Manual preview
P 400
Brand: Olympus Pages: 236
Canon I450 - i 450 Color Inkjet Printer Simplified Manual preview
I450 - i 450 Color Inkjet Printer
Brand: Canon Pages: 13
Malyan M150 Quick Start Manual preview
M150
Brand: Malyan Pages: 9
B3 innovations Pico Manual preview
Pico
Brand: B3 innovations Pages: 12
Labelmate UCAT-40 User Manual preview
UCAT-40
Brand: Labelmate Pages: 2
LabelTac Pro X User Manual preview
Pro X
Brand: LabelTac Pages: 15
Magtek ExpressCard 2000 Preventive Maintenance Procedure preview
ExpressCard 2000
Brand: Magtek Pages: 25

Brands by name

Popular brands

Load more brands