Custom Audio Electronics VKP80II-EE, User Manual

Page: 23 / 84

1 1 8 8
ETHERNET INTERFACE
RJ45 female connector
J15
1 TPOUT+
2 TPOUT-
3 TPIN+
4 GND
5 GND
6 TPIN-
7 n.c
8 n.c
9 +3.3 V
10 LED-LAN
11 +3.3 V
12 LED-LNK
13 Shield
14 Shield
Note :
The functionality of two led are speci fi ed in the following table:
LED FUNCTION
LED-LNK Link (yellow color): the led lights up when a connection is active
LED-LAN Rx/Tx: (green color): the led lights up when occurs a data reception or transmission
• To directly connect the printer to a Personal Computer, use a Cross-Over Ethernet cable.
• To connect the printer to a hub device, use an UTP Ethernet cable (Pin to Pin).
Note:
The pinout shown in table represents the input signals to component J15 before the isolation voltage transformer.
3. INSTALLATION
User Manual
VKP80II-EE 23