APPENDIX A - ACCESSORIES AND SPARE PARTS
TPTCM
9
A-
A
B
A
B
A
B
The points at which the support is fastened to the printer frame are always
the same. Figs. A.11 and A.12 show the fastening points on the TPTCM60x
and TPTCM112x printers; in the position labelled with the letter A, place the
screw that acts as pivot, and in the other position, marked B, place the one
that fastens the support.
Use fig. A.13 below as a reference for normal positioning of the support.
The screw marked with the letter A acts as a pivot, while the other screw (B)
fastens it in the desired position. After having assembled screw A, rotate the
support in either direction to find the desired position and assemble the
second screw in one of the five numbered holes on the support,
corresponding to point B (see fig. A.13) on the frame.
(Fig.A.11)
(Fig.A.13)
(Fig.A.12)
TPTCM60x
TPTCM112x
