1. INSTALLATION AND USE
TPTCM
5
1-
General notes:
1)
The parameters marked with the symbol
D
are the default values.
2)
The symbol
@
indicates the TPTCM60x
3)
The symbol
A
indicates the TPTCM112x
4)
Settings remain active even after the printer has been turned off.
The settings made are stored in EEPROM (nonvolative memory).
During power-up, if both the LINE FEED and FORM FEED keys are held
down, the printer enters configuration mode and prints-out the setup report; it
will remain in standby until a key is pressed or characters are received
through the communication port (see Hexadecimal dump).
When the LINE FEED key is pressed, the printer skips the setup mode and
terminates the Hexadecimal dump function.
When the FORM FEED key is pressed, the printer enters the parameter
entry mode.
1.4 HEXADECIMAL DUMP
This function is used to diagnose the characters received through the
communication port; the characters are printed out both as hexadecimal
codes and ASCII codes.
Once the self-test routine has finished, the printer enters Hexadecimal Dump
mode. The printer remains in standby until a key is pressed or characters are
received through the communication port.
For every 10 characters received, the hexadecimal and corresponding
ASCII codes are printed out (if the characters are underlined, the receive
buffer is full).
Shown below is an example of a Hexadecimal Dump:
48 65 78 61 64 65 63 69 6D 61
Hexadecima
6C 20 64 75 6D 70 20 66 75 6E
l dump fun
63 74 69 6F 6E 20 30 31 32 33
ction 0123
34 35 36 37 38 39 61 62 63 64
456789abcd
65 66 67 68 69 6A 6B 6C 6D 6E
efghijklmn
6F 70 71 72 73 74 75 76 77 78
opqrstuvwx
79 7A
yz
