APPENDIX A - ACCESSORIES AND SPARE PARTS
TPTCM
7
A-
A
C
B
(Fig.A.7)
1. Remove the roll holder pin by unscrewing it in a counter-clockwise
direction as shown in fig. A.7.
2. Assemble the roll holder pin (A) on the support by screwing it in a
clockwise direction; with the pin assembled, mount the support on the printer
frame using the two screws provided in the kit (B) as shown in fig. A.8. If
included in the kit, assemble the counter-disk (C) on the roll holder pin.
(Fig.A.8)
