Custom Audio Electronics TG1260HIII BP, User Manual

Page: 75 / 128

PRINT WIDTH Width of printing area:
52 mm
56 mm
D
PAPER THRESHOLD Threshold value (in percent) for the recognition of the presence of paper by the paper
presence sensor:
30% 70%
40%
D 80%
50% 90%
60%
PAPEREND BUFFER CLEAR Cleaning mode of the data in receive buffer, if the printing is stopped due to lack of paper:
Disabled
D
= the data remain in the receive buffer. When the paper runs out, the device
keeps the remaining data in the receive buffer and prints the remaining
portion of the ticket after that the new paper is loaded.
Enabled = when the paper runs out, all data in the receive buffer are deleted.
LOW ENERGY MODE Setting the inactivity period in seconds after which the device enters in sleep mode:
Disabled
D
15 s
30 s
60 s
LED bar FGND (RRGGBB) Set the foreground color for the status LED on the bezel. This parameter consists in three
value for red, green and blue color to be expressed in hexadecimal:
RR = from 00
D
to FF
GG = from 00 to FF
D
BB = from 00
D
to FF
LED bar BGND (RRGGBB) Set the background color for the status LED on the bezel. This parameter consists in three
value for red, green and blue color to be expressed in hexadecimal:
RR = from 00 to FF (8F
D
)
GG = from 00
D
to FF
BB = from 00 to FF
D
CUTTER Set the autocutter management:
Disabled = Autocutter disabled
Enabled
D
= Autocutter enabled
This parameter is valid only for TG1260HIII CUT, TG1260HIII BP, TG1260HIII CUT BP,
TG1260HIII CHROMED, TG2460HIII TRANSP, TG2460HIII CHROMED and
TG2460HIII CUT.
75