manualshive.com logo in svg

Curtiss-Wright EXLAR GTX Series, Installation & Service Instructions Manual

Share
Download
Curtiss-Wright EXLAR GTX Series Installation & Service Instructions Manual Download Page 4

4

 | GTX Series Actuator Installation & Maintenance Instructions

Curtiss-Wright | Rev D | PN75557 | 10/01/2019

1.3 SAFETY CONSIDERATIONS

Safety is of paramount importance during the installation and 
operation of your GTX Series actuator. Throughout this manual, 

content flagged with the cautionary symbols shown below 

should be read carefully by installers and operators to help 
avoid property damage, personal injury or death.

 

DANGER!

 Indicates an extremely hazardous situation 

which will result in serious injury or death if precautions are not 
followed. Extreme care should be taken in these situations.

 

WARNING!

 Indicates a potentially hazardous situation 

which could result in serious injury or death if precautions are 
not followed. Extra care should be taken in these situations.

 

CAUTION!

 Indicates a potentially hazardous situation 

which could result in property damage or minor to moderate 
injury.

IMPORTANT! 

Identifies statements that provide important 

information to help ensure safe and trouble-free installation  
and operation.

Summary of Contents for EXLAR GTX Series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands