manualshive.com logo in svg

Curtiss-Wright EXLAR GTX Series, Installation & Service Instructions Manual

Share
Download
Curtiss-Wright EXLAR GTX Series Installation & Service Instructions Manual Download Page 16

16

 | GTX Series Actuator Installation & Maintenance Instructions

Curtiss-Wright | Rev D | PN75557 | 10/01/2019

8.0 PRODUCT RETURNS

Procedure to return products for repair or replacement:

1.  Before requesting an RGA number, please contact Exlar 

Technical Support to see if it is possible to resolve the issue 
prior to return.

2.  If it is determined that an RGA number is required, please 

do so by completing an online RGA request form found 
on the Exlar website. For international repairs, closely 
follow instructions provided by the Exlar Returned Goods 
Administrator. Failure to comply with issued instructions 
may result in delays for repair and return.

9.0 CERTIFICATIONS

 

C E R T I F I C A T E   O F   C O M P L I A N C E  

 

 

 

Certificate Number 

 

20190906-E225288 

Report Reference 

 

E225288-20171030 

Issue Date

 

 

2019-SEPTEMBER-06 

 

 

 

Bruce Mahrenholz, Director North American Certification Program 

 

UL LLC 

 

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please 

contact a local UL Customer Service Representative at 

http://ul.com/aboutul/locations/

 

 

 

Page 1 of 2 

Issued to:

  

EXLAR CORP 
18400 W 77TH ST 

CHANHASSEN MN 55317 

 

   

This 

certificate confirm

s

 that 

representative samples of

 

 

COMPONENT - SERVO AND STEPPER MOTORS 
See next page for models 

 

   

 

  Have been investigated by UL in accordance with the 

component requirements in the Standard(s) indicated on 

this Certificate. UL Recognized components are incomplete 

in certain constructional features or restricted in 

performance capabilities and are intended for installation in 

complete equipment submitted for investigation to UL LLC. 

 

   

Standard(s) for Safety:

 

 

UL 1004-1, Rotating Electrical Machines 

–

 General 

Requirements 

UL 1004-6, Servo and Stepper Motors 

CSA C22.2 No. 100, Motors and Generators 

Additional Information: 

 

See the UL Online Certifications Directory at  

https://iq.ulprospector.com

  for additional information. 

 

 

This 

Certificate of Compliance

 does not provide authorization to apply the UL Recognized Component Mark. Only 

the UL Follow-Up Services Procedure provides authorization to apply the UL Mark.  

 

Only those products bearing the UL Recognized Component Mark should be considered as being UL Certified 

and covered under UL’s Follow

-Up Services.  

 

Look for the UL Recognized Component Mark on the product.   

 

 

 

C E R T I F I C A T E   O F   C O M P L I A N C E  

 

 

 

Certificate Number 

 

20190906-E225288 

Report Reference 

 

E225288-20171030 

Issue Date

 

 

2019-SEPTEMBER-06 

 

 

 

Bruce Mahrenholz, Director North American Certification Program 

 

UL LLC 

 

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please 

contact a local UL Customer Service Representative at 

http://ul.com/aboutul/locations/

 

 

 

Page 2 of 2 

This is to certify that representative samples of the product as specified on this certificate were tested 

according to the current UL requirements. 

 

 

Class H Insulated Servo motors, models 

GTX080-###-##-X-#-##-####-#-#-#, 

GTX080-###-##-D-#-##-####-#-#-#, 

GTX100-###-##-X-#-##-####-#-#-#   

 

 

“X” –

 indicated stator winding code, maybe any alphanumeric character except D. 

 

“#” –

 Represents a single alphanumeric character, indicating exterior mechanical, shaft/thread, and 

cosmetic configurations.   

 

Summary of Contents for EXLAR GTX Series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands