manualshive.com logo in svg

Curtiss-Wright CNS4 CSfC, User Manual

Share
Download
Curtiss-Wright CNS4 CSfC User Manual Download Page 108

User Guide

DDOC0108-000-A2

CNS4 CSfC

11 - 12

Command Line Interface

Revision 0.0

11.2.9

diskcfg

Syntax

diskcfg [-h|-l|-s|-c|-d|-q|-t|-n|-a|-w|-m] 

diskcfg [ --scan | --rescan | --version ]

Description

The diskcfg command allows the user to display detailed information about the FSM disks and 

their configuration.

Options

-h | --help.............................  Show command help

-l | --label  ............................  Generate output with label before each value. If not specified data is 

output in table form 

-s | --serial  .......................... Show Serial Number, product name and revision

-c | --ctrl ............................... Show SATA controller and ATA port number

-d | --dev.............................. Show local /dev/sd? name 

-q | --queue..........................  Show queue depth and scheduler 

-t | --temp............................. Show disk die and carrier temperature 

-n | --nas.............................. Show NAS service name assignments 

-a | --all ................................ Show all options 

-w | --wrap ...........................  Word wrap output 

-m  .......................................  Minimize space between fields 

--scan ..................................  Delete all existing FSM SATA connections then scan each SATA host 

port for disks.

--rescan ............................... Scan each SATA host port for disks.

--version .............................. Show program version

Field label definitions:

[dev] .................................... Disk device. D00 to D07 based on position.

[osName]............................. Disk name as seen my OS (ex. /dev/sdb).

[fsmName]........................... FSM device name (ex. /dev/fsm0-d0).

[sz]....................................... Disk size.

[link]..................................... SATA link state. (ex. 1.0Gb/s)

[mode]  ................................ Disk mode. Partition or raid member

[ctrl]  .................................... SATA controller port used by disk

[ata ...................................... SATA host name 

[qd] ...................................... Disk native command queue depth 

[sched]................................. Disk command scheduler

[dtemp] ................................ Disk on board die temp

[ctemp] ................................ FSM carrier temp 

[sn]  ..................................... Disk serial Number

[model] ................................ Disk model number

[fw]....................................... Disk firmware version

[num_serv] .......................... Number of services on disk/raid (only appears in label mode)

[serv_name] ........................ Name of service on disk/raid

Example 1

cns> 

diskcfg 

diskcfg] 

     FSM name   |  Size  |   Link  | Mode  | 

------------------------------------------ 

   /dev/fsm0-d0 | 2000GB | 3.0Gb/s | PART  | 

   /dev/fsm1-d0 | 1024GB | 3.0Gb/s | RAIDa | 

   /dev/fsm2-d0 | 1024GB | 3.0Gb/s | RAIDa | 

   /dev/fsm3-d0 | 1000GB | 3.0Gb/s | PART  | 

[!diskcfg] OK 

Summary of Contents for CNS4 CSfC














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands