User Guide
DDOC0108-000-A2
CNS4 CSfC
7 - 13
System Configuration
Revision 0.0
The swe=<str> entry at the end of each line indicates if the partitions is software encrypted. Valid
string values are no, open and closed. 'no' indicates there is not an encrypted partition on the
partition. 'open' indicates there is an encrypted container present on the partition and the data is
accessible to read and write. 'closed' indicates there is an encrypted container present on the
partition but the data is not accessible
Device_partitions
provides a list of partitions used by each possible service type (NAS, ISCSI0,
iSCSI1, etc). To use a service it needs to be assigned to one or more partitions from the partition
list. This section show which partitions have been assigned to each service.
Image file
shows a list of files that have been created on a NAS volume for the purpose of being
exported as a target device. External hosts see the target iSCSI devices as disks. This section
start by listing the volumes containing target files. For each NAS volume the name and size of
each file is listed. Then it shows which files have been assigned to each possible service.
Example
7.29
sw
Purpose
Generate single line machine output
Command
sysconfig --sw
Flag Modifiers Explanation
Not Applicable
7.30
trim
Purpose
Trim one or more mounted NAS partitions
Command
sysconfig --trim <# | ## | all>
Flag Modifiers Explanation
# - single NAS disk volume number
# # - <# #> two or more NAS disk volumes
all - all NAS disk volumes
cns>
sysconfig --status
[sysconfig]
DiskConfig:
Individual_disks: numDisk=1
Disk0: name=fsm0-d3 size=512GB
Raid_disks: numDisk=3
Disk0: name=fsm0-d0 size=512GB
Disk1: name=fsm0-d1 size=512GB
Disk2: name=fsm0-d2 size=512GB
Raid_volumes: numDisk=1
Raid0: name=fsm_raida level=0 size=1536GB numDisk=3 disk=fsm0-d0 disk=fsm0-d1
disk=fsm0-d2
Partitions: numPartitions=6
Part0: name=fsm0-d3 size=128027MB pSize=25.00% dp=1 numServ=1 sName=fsm_nas0
fmt=ext4 mnt=1 enb=0 swe=open
Part2: name=fsm0-d3 size=128028MB pSize=25.00% dp=3 numServ=1 sName=fsm_nas1
fmt=ext4 mnt=0 enb=0 swe=open
Part3: name=fsm0-d3 size=128027MB pSize=25.00% dp=4 numServ=1 sName=Unconfigured
swe=open
Part4: name=fsm_raida size=768165MB pSize=50.00% dp=1 numServ=1 sName=iSCSI0_L0
enb=0 swe=open
Part5: name=fsm_raida size=768165MB pSize=50.00% dp=2 numServ=1
sName=Unconfigured swe=open
Device_partitions: numServ=3
NAS: num_part=2 part=0 part=2
FC0: num_part=1 part=1
iSCSI0: num_part=1 part=4
[!sysconfig] OK
