![background image](http://html.mh-extra.com/html/curtis/1jd3520as/1jd3520as_installation-instructions-manual_2700164006.webp)
INDUSTRIES, LLC.
111 HIGGINS STREET, WORCESTER, MA 01606
CABS/BLADES/ SPREADERS/ACCESSORIES
JOHN DEERE 3000 SERIES HARD & SOFT SIDED CABS
7. ROOF
7.1 With assistance, install roof as shown using 5/16 x 3/4” long button head
screws, plastic washers, steel washers, and locknuts in all holes except the
two front corners and the middle ones on the left and right sides (these two
middle bolts do not require locknuts). Use 1” long bolts on the 2 front cor-
ners (see fig. 7.1).
8. REAR WINDOW (hard side only)
8.1 See fig. 8.1. Install two (2) ball studs to the inner curved surface of the win-
dow (Note: the Phillips head portion of the screw is to be on the outside of
the window.) The base of the ball stud goes against the inner surface of the
window, with the boss sitting inside the window hole. Next, the plastic
countersunk washer goes on the outside window surface. Bolt these compo-
nents together, making sure that the ball portion of the ball stud is facing the
outside edge of the window as shown in fig. 8.1.1 (so that the gas shocks
will be as close to the edge of the window as possible.)
Fig. 7.1 Install Roof
threaded inserts here
Gas shock
Fig. 8.1.1 Ball stud
assembly view
Ball stud
Inside of window
Window will be in here
Fig. 8.1 Loose ball
stud components
Plastic countersunk
washer w/ built in o-ring
and a short flat head screw
Ball stud
p. 6 of 10