46
TILT TOGGLE
Briefly press and release to move the slats in the open or closed direction
and stop at the next position setting. There are seven (7) position settings
from the full up to the full down position. The user may also press and hold
the toggle button until the slats get to the desired position, then release the
toggle.
CHANNEL SELECTOR
Used to customize control of multiple blinds on a single remote. The currently
selected channel is indicated by the Channel LEDs. Pressing the CHANNEL
Button once will display the current channel. Pressing it again will switch to
the next channel. When all LEDs are lit, the remote is selected to broadcast
on all channels.
FULL UP/ LEFT
Moves the slats to the full up position for horizontal blinds or full right
position for vertical blinds.
FULL OPEN
Moves all slats to the full open position.
FULL DOWN/ RIGHT
Moves all slats to the full down position for horizontal blinds, or full left
position for vertical blinds.
FAVORITE
The user can program this button to any position they choose to be their
most preferred position; however, if left unchanged it will move the slats to
approximately half way between the full open and the full down/ left position.
